LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 6 s Grand Touring >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection >> Driver Side

Driver Side

  1. Switch the ignition to off.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. . FRONT SEAT REMOVAL/INSTALLATION .
  4. Remove the front buckle. . FRONT BUCKLE REMOVAL/INSTALLATION .
  5. Inspect for continuity between the buckle switch terminals using a tester.
    • If not as indicated in the table, replace the front buckle.
      Fig 1: Switch Circuit Continuity Chart
      G06206105Courtesy of MAZDA MOTORS CORP.
      Fig 2: Buckle Switch Circuit Diagram
      G06206106Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals