LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 5 Touring, 2.3 L >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Front Door Glass Removal/Installation

Front Door Glass Removal/Installation

  1. To access the glass installation bolt, position the front door glass so that the distance from the top of the front door glass to the upper part of the front beltline molding is approx. 100 mm {3.9 in}.
  2. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  3. Disconnect the negative battery cable.
  4. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  5. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
    Fig 1: Adjusting Door Glass Position
    G06762222Courtesy of MAZDA MOTORS CORP.
  6. Remove the front door speaker. (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION .)
    NOTE:
    • When installing the front door glass, the front door speaker must be removed to align the glass edge with the glass run channel by hand through the speaker installation hole.
  7. Remove the hole cover.
  8. Remove the screws.
  9. Lift the front door glass up and remove it in the direction of the arrow in illustration.
  10. Install in the reverse order of removal.
    Fig 2: Lifting Front Door Glass Up Positions
    G06762223Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals