LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 3 i SV, 2.0 G >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Charging System [L3 With TC]) >> Generator Removal/Installation [L3 With TC] >> Generator Removal Note

Generator Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the cooler hose bracket bolt and set the cooler hose out of the way before performing the generator removal/installation.
  2. Remove the generator from above the engine compartment.
    Fig 1: Cooler Hose And Bolt With Torque Specifications
    G06732984Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals