LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 3 i SV, 2.0 G >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Charging System [L3 With TC]) >> Generator Disassembly/Assembly [L3 With TC] >> Pulley Disassembly/Assembly Note

Pulley Disassembly/Assembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Disassemble/assemble the pulley using the SST. 

    Tightening torque 

    60-85 N.m {6.2-8.6 kgf.m, 45-62 ft.lbf} 

    Fig 1: Removing Pulley Using SST
    G06732999Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals