Hood Latch Switch Inspection

Disconnect the negative battery cable.
Remove the hood latch. (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .)
Press the latch in using a flathead screwdriver to inspect the latch lever condition.

Fig 1: Inspecting Hood Latch Switch
Courtesy of MAZDA MOTORS CORP.
Verify that the continuity is as indicated in the table.
- If not as indicated in the table, replace the hood latch.
  
  Fig 2: Continuity Chart
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 3: Hood Latch Switch Circuit Diagram
  Courtesy of MAZDA MOTORS CORP.