LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window Motor Inspection >> Rear

Power Window Motor Inspection: Rear

  1. Disconnect the negative battery cable.
  2. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
  3. Disconnect the power window motor connector.
  4. Apply battery positive voltage and connect the ground to power window motor terminals E and F, and then inspect the power window motor operation.
    • If the power window motor does not operate as indicated in the table, replace the power window motor.
      POWER WINDOW MOTOR OPERATION CHART

      Operation Terminal
      E F
      Open Ground B+
      Close B+ Ground
      Fig 1: Inspecting Power Window Motor Operation
      G06731789Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals