LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Request Switch Inspection >> Liftgate

Request Switch Inspection: Liftgate

  1. Disconnect the negative battery cable.
  2. Remove the inboard light. (See INBOARD LIGHT REMOVAL/INSTALLATION .)
  3. Remove the request switch (liftgate). (See REQUEST SWITCH REMOVAL/INSTALLATION .)
  4. Verify the continuity of request switch terminals A and B.
    Fig 1: Inspecting Request Switch (Liftgate)
    G06732007Courtesy of MAZDA MOTORS CORP.
  5. Verify that the continuity is as indicated in the table.
    Fig 2: Continuity Chart
    G06732008Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the request switch.
scientia non olet · About LEMON Manuals