LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Personalization Features Setting Procedure >> Advanced Keyless Entry And Push Button Start System

Advanced Keyless Entry And Push Button Start System

NOTE:
  • Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the CUSTOMIZED FUNCTION SETTING PROCEDURE.
  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    1. Select "Module Programming".
  3. Then, select items from the screen menu in the following order.
    1. Select "Programmable Parameters".
    2. Select "RKE".
  4. Select the item name, and then select option.
    Fig 1: Identifying DLC-2 Location
    G06731116Courtesy of MAZDA MOTORS CORP.
    MAZDA MODULAR DIAGNOSTIC SYSTEM CHART

    Mazda Modular Diagnostic System (M-MDS) display Function Initial setting Setting content Control unit
    Advanced keyless function Advanced keyless entry and push button start system function can be set to inoperable. Enabled Disabled/Enabled Keyless control module
    Advanced key battery low warning Advanced key remaining battery level/battery dead warning can be set. Enabled Disabled/Enabled Keyless control module
    Auto Lock Auto lock function can be set. Disabled Disabled/Enabled Keyless control module
    2 stage door unlocking (with SKE) The method for unlocking the doors using the request switch can be selected. Enabled Disabled/Enabled Keyless control module
    Auto relock timer (with SKE) Auto re-lock operation timing can be changed. 30 s 30s/60s/90s Keyless control module
    Answer back buzzer volume Volume adjustment of the answer back buzzer can be set. 8 Disabled/1-10 Keyless control module
    Warning buzzer volume Volume adjustment of the warning buzzer can be set. 8 1-10 Keyless control module
scientia non olet · About LEMON Manuals