Selection of Procedure for Immobilizer System-Related Parts Programming

Select the applicable programming procedure from the service content of the immobilizer system-related parts.

Immobilizer System-Related Parts Service and Programming Procedure Table

PROGRAMMING PROCEDURE CHART

No.	Service		Programming procedure
1	Additional key programming	Have two or more valid keys	(See NO. 1 ADDITIONAL KEY PROGRAMMING PROCEDURE (USING TWO VALID KEYS) .)
2	Additional key programming	Have one valid key or none	(See NO. 2 ADDITIONAL KEY PROGRAMMING PROCEDURE (USING THE M-MDS) .)
3	Additional key programming procedure setting	Disable programming using valid keys	(See NO. 3 ADDITIONAL KEY PROGRAMMING PROCEDURE CHANGING .)
3	Additional key programming procedure setting	Enable programming using valid keys	(See NO. 3 ADDITIONAL KEY PROGRAMMING PROCEDURE CHANGING .)
4	Programming due to PCM replacement		(See NO. 4 PROGRAMMING PROCEDURE DUE TO PCM REPLACEMENT .)
5	Programming due to instrument cluster replacement		(See NO. 5 PROGRAMMING PROCEDURE DUE TO INSTRUMENT CLUSTER REPLACEMENT .)
6	Programming due to simultaneous replacement of immobilizer system-related parts PCM Instrument cluster		(See NO. 6 PROGRAMMING PROCEDURE DUE TO SIMULTANEOUS REPLACEMENT OF IMMOBILIZER SYSTEM-RELATED PARTS (PCM AND INSTRUMENT CLUSTER) .)
7	Programming due to coil antenna replacement		Programming of immobilizer system-related parts is not necessary