LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 3 Mazdaspeed, 2.3 3 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Liftgate Latch Switch Inspection

Liftgate Latch Switch Inspection

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
    2. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
    3. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
    4. Liftgate latch and lock actuator (See LIFTGATE LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION .)
  3. Press the latch in using a flathead screwdriver to inspect the latch lever condition.
    Fig 1: Liftgate Latch And Liftgate Lock Actuator
    G06731988Courtesy of MAZDA MOTORS CORP.
  4. Verify that the continuity is as indicated in the table.
    • If not as indicated in the table, replace the liftgate latch and lock actuator
      Fig 2: Continuity Chart
      G06731989Courtesy of MAZDA MOTORS CORP.
      Fig 3: Liftgate Latch Switch Circuit Diagram
      G06731990Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals