LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> Tribute s Touring, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting [Non-Hybrid Engine) >> Quick Test >> After Repair Procedure

After Repair Procedure

  1. Connect the IDS or equivalent tester to the vehicle DLC-2 16-pin connector located on the left side of the center console.
    Fig 1: Identifying DLC-2 16-Pin Connector
    G05463673Courtesy of MAZDA MOTORS CORP.
  2. Cycle the ignition key from OFF to ON.
  3. Record DTC if retrieved.
  4. Erase all diagnostic data by IDS or equivalent tester.
scientia non olet · About LEMON Manuals