Symptom Troubleshooting [Non-Hybrid Engine): Engine: Inspection/Verification

Since diagnosis and testing actually begins when repairs are taken on, the following procedure is recommended.

1. Verify the customer concern by operating the system.
2. Visually inspect for obvious signs of mechanical damage. If the concern cannot be reproduced, carry out a road test and/or visual check with the aid of the following table.

   Visual Inspection Chart 

   VISUAL INSPECTION CHART
   
   

   Mechanical
   Coolant leaks Oil leaks Leaks in the fuel system Visibly damaged or worn parts Loose or missing nuts or bolts

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the concern is not visually evident, verify symptom and see SYMPTOM TROUBLESHOOTING CHART - ENGINE  .