B15 Check The ISP-R And ISP-R/S Circuits For Intermittent Concerns

Key in OFF position.
PCM connector connected.
Key ON, engine OFF.
Access the PCM and monitor the KEYST PID.
Access the GEM/SJB and monitor the IGN_SW PID.
Turn the key to the ON and START positions, while observing the PIDs.
Carefully wiggle all accessible wiring and connectors associated with the circuit and look for a change in the PID state.
Is a concern present during the wiggle test?
- Yes: REPAIR as necessary.
  CLEAR the DTCs. REPEAT the self-test.
- No: GO to Z: INTERMITTENT .