LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> RX-8 Touring, 1.3 M, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Trunk Key Cylinder Removal/Installation

Trunk Key Cylinder Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  3. Detach the rod.
  4. Remove the nuts, then remove the trunk key cylinder.
  5. Install in the reverse order of removal.
Fig 1: Identifying Trunk Key Cylinder Switch Connector, Trunk Key Cylinder And Nut
G04928931Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals