LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> RX-8 Touring, 1.3 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 583 (Seat System) >> Walk-In Switch Removal/Installation

Walk-In Switch Removal/Installation

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  3. Remove the front seat back trim. (See FRONT SEAT BACK TRIM REMOVAL/INSTALLATION .)
  4. Remove the connector.
  5. Remove the screw.
  6. Remove the walk-in switch.
  7. Install in the reverse order of removal.
Fig 1: Identifying Walk-In Switch, Screw And Connector
G05985939Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals