Walk-In Switch Inspection

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Connect battery positive voltage to recliner motor terminal A or B, then verify that the walk-in switch operate as shown in the table.
- If the walk in switch does not operate as indicated in the table, replace the recliner motor.
Fig 1: Walk-In Switch Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Walk-In Switch Connector
Courtesy of MAZDA MOTORS CORP.