Power Brake Unit Removal/Installation
WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [13B-MSP] .)
- Remove the front suspension tower bar. (MT) (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION [MT] .)
- Remove the master cylinder. (See MASTER CYLINDER REMOVAL/INSTALLATION .)
- Remove in the order indicated in the table.
- Install in the reverse order of removal.
- After installation, perform brake pedal inspection. (See BRAKE PEDAL INSPECTION .)