LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> RX-8 Touring, 1.3 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 560 (Entertainment System) >> Accessory Socket Inspection

Accessory Socket Inspection

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the hole cover. (See CONSOLE REMOVAL/INSTALLATION .)
  3. Connect a tester as shown in the figure and verify that there is continuity.
    • If the continuity cannot be verified, replace the accessory socket.
    Fig 1: Identifying Accessory Socket Terminals
    G05986349Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals