Transmission/Transaxle Technical Data
CLUTCH TECHNICAL DATA SPECIFICATION
| Item | Specification |
|---|---|
| Specified fluid | SAE J1703, FMVSS 116 DOT-3 |
| Standard pedal stroke | 130 mm {5.12 in} |
| Clutch pedal play | 5-15 mm {0.20-0.59 in} |
| Clutch pedal push rod play | At push rod setting line : 0.1-0.5 mm {0.004-0.020 in} (Reference value) At pedal pad : 0.5-2.9 mm {0.020-0.110 in} |
| Clutch disengagement stroke (Reference value) | 111.8 mm {4.402 in} |
| Clutch cover diaphragm spring fingers maximum depth | 0.6 mm {0.024 in} |
| Clutch cover maximum clearance | 0.5 mm {0.020 in} |
| Clutch cover maximum height difference | 1.0 mm {0.039 in} |
| Clutch disc minimum depth | 0.3 mm {0.012 in} |
| Clutch disc maximum runout | 0.7 mm {0.028 in} |
| Flywheel maximum runout | 0.2 mm {0.008 in} |
TECHNICAL DATA SPECIFICATION MANUAL TRANSMISSION (P66M-D)
| Item | Specification |
|---|---|
| Transmission case specified oil grade | API Service GL-4 |
| Transmission case specified oil viscosity | SAE 75W-90 |
| Transmission case capacity (approx. quantity) | 1.95 L {2.06 US qt, 1.72 lmp qt} |
| Shift control case specified oil grade | API Service GL-4 |
| Shift control case specified oil viscosity | SAE 75W-90 |
| Shift control case capacity (approx. quantity) | 80-230 ml {80-230 cc, 4.9-14.0 in3 } |
Automatic Transmission [SJ6A-EL]
TECHNICAL DATA SPECIFICATION AUTOMATIC TRANSMISSION (SJ6A-EL)
| Item | Specification | |||
|---|---|---|---|---|
| ATF | Type | JWS3309 | ||
| Capacity (Approx. quantity) | (L {US qt, lmp qt}) | 8.0 {8.5, 7.0} | ||
| Line pressure | (kPa {kgf/cm2 , psi}) | D, M range | Idle | 355-425 {3.7-4.3, 52-61} |
| Stall | 1,395-1,505 {14.3-15.3,203-218} | |||
| R position | Idle | 485-585 {5.0-5.9, 71-84} | ||
| Stall | 1,639-1,847 {16.8-18.8,238-267} | |||
| Engine stall speed | (RPM) | D, M range | 2,150-2,800 | |
| R position | 1,750-2,250 | |||
| Time lag | (s) | N position → D range | 1.0 or less | |
| N position → R position | 1.2 or less | |||
| Transmission fluid temperature (TFT) sensor | (kilohm) | ATF temperatures 0 °C {50°F} | Approx. 6.445 | |
| ATF temperature: 25°C {77°F} | Approx. 3.500 | |||
| ATF temperature: 110°C {230°F} | Approx. 0.247 | |||
| Turbine sensor resistance | (ohm) | 560-680 | ||
| VSS resistance | (ohm) | 560-680 | ||
| Solenoid valves ATF temperature: 20 °C {68°F} | (ohm) | Shift solenoid A | 11-15 | |
| Shift solenoid B | 11-15 | |||
| Shift solenoid C | 11-15 | |||
| Shift solenoid D | 11-15 | |||
| Shift solenoid E | 11-15 | |||
| Shift solenoid F | 5.0-5.6 | |||
| Shift solenoid G | 5.0-5.6 | |||
| Line pressure control solenoid | 5.0-5.6 | |||
| TCC solenoid | 5.0-5.6 | |||
| Distance A between end of torque converter and face of converter housing | (mm {in}) | 38.6 {1.52} | ||