Specification (Unloaded Condition)
REAR WHEEL ALIGNMENT SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Total toe-in | Tire [Tolerance ±4 mm (0.15 in}] | (mm {in}) | 3.6 {0.14} |
| degree | 0°19'±20' | ||
| Camber [Tolerance ±1°] | Vehicle height: From the end of the rear fender to the center of the wheel (mm {in}) | 366-375 {14.5-14.7} | -1°22' |
| 376-385 {14.9-15.1} | -1°02' | ||
| 386-395 {15.2-15.5} | -0°45' | ||
| 396-405 {15.6-15.9} | -0°31' | ||
| 406-415 {16.0-16.3} | -0°18' | ||
REAR WHEEL ALIGNMENT SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Total toe-in | Tire [Tolerance ±4 mm {0.15 in}] | (mm {in}) | 3.6 {0.14} |
| degree | 0°19'±20' | ||
| Camber [Tolerance ±1°] | Vehicle height: From the end of the rear fender to the center of the wheel (mm {in}) | 364-373 {14.4-14.6} | -1°26' |
| 374-383 {14.8-15.0} | -1°06' | ||
| 384-393 {15.2-15.4} | -0°48' | ||
| 394-403 {15.6-15.8} | -0°33' | ||
| 404-413 {16.0-16.2} | -0°21' | ||
NOTE:
- Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
- Difference between the left and right camber angle is within 1° .