LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Front Buckle Switch Inspection >> Driver-Side

Front Buckle Switch Inspection: Driver-Side

  1. Disconnect the negative battery cable.
  2. Disconnect the buckle switch connector.
  3. Verify continuity as indicated in the table.
    • If not as indicated in the table, replace the front buckle.
    Fig 1: Continuity Chart
    G05985618Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Front Buckle
    G05985619Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals