LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 593 (Lighting System) >> Front Turn Light Bulb Removal/Installation

Front Turn Light Bulb Removal/Installation

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the fasteners, then slightly bend back the front mudguard.
  3. Disconnect the connector.
  4. Remove the socket, then remove the front turn light bulb.
  5. Install in the reverse order of removal.
    Fig 1: Identifying Front Turn Light Bulb, Connector And Socket
    G05986179Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals