Front Side Turn Light Removal/Installation

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Push the front side turn light in the direction of the arrow (1) and pull it out.

Fig 1: Pulling Out Front Side Turn Light
Courtesy of MAZDA MOTORS CORP.
Turn the front side turn light in the direction of the arrow (2.)

Fig 2: Turning Front Side Turn Light
Courtesy of MAZDA MOTORS CORP.
Disconnect the connector.
Install in the reverse order of removal.

Fig 3: Identifying Front Side Turn Light And Connector
Courtesy of MAZDA MOTORS CORP.