LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 577 (Security System And Locks System) >> Keyless Antenna Removal/Installation >> Interior, Trunk

Interior, Trunk

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  3. Remove the nuts.
  4. Disconnect the connector, then remove the keyless antenna.
  5. Install in the reverse order of removal.
Fig 1: Identifying Keyless Antenna And Nut (Trunk)
G04928913Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals