Pcm Temperature Sensor Inspection [13B-MSP]

1. Connect the M-MDS to the DLC-2.
2. Turn the ignition switch to the ON position.
3. Select PCM_T on the M-MDS.
4. Verify that the PCM_T PID voltage is within the specification.

• If not as verified, replace the PCM. (See PCM REMOVAL/INSTALLATION [13B-MSP] .)

PCM Temperature Sensor Output Voltage 1.2-2.6 V 

Fig 1: Identifying DLC-2 Connector

Courtesy of MAZDA MOTORS CORP.