LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Eccentric Shaft Position Plate Removal/Installation [13B-MSP]

Eccentric Shaft Position Plate Removal/Installation [13B-MSP]

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] )
  2. Disconnect the negative battery cable.
  3. Remove the drive belt referring to the drive belt replacement. (See DRIVE BELT REPLACEMENT [13B-MSP] .)
  4. Remove in the order indicated in the table.
    5. Fig 1: Drive Belt Pulley, Eccentric Shaft Position Plate With Screws Torque Specifications
    G05981158Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals