Power Outer Mirror Switch Removal/Installation

1. Disconnect the negative battery cable.
2. Disengage clips using a tape-wrapped flathead screwdriver.
3. Remove the switch panel from the front door trim keeping the tab from catching.
4. Disconnect the power window main switch connector and power outer mirror switch connector.
   Fig 1: Detaching Rear Of Switch Panel Clip Using Flathead Screwdriver

   Courtesy of MAZDA MOTORS CORP.
5. Remove the screws and the power outer mirror switch.
6. Install in the reverse order of removal.

Fig 2: Identifying Power Outer Mirror Switch

Courtesy of MAZDA MOTORS CORP.