LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Power Systems >> Ignition Switch Removal/Installation [Without Advanced Keyless Entry And Start System]

Ignition Switch Removal/Installation [Without Advanced Keyless Entry And Start System]

  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: Identifying Ignition Switch, Connector And Screw
    G05986362Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals