LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Request Switch Removal/Installation [With Advanced Keyless System] >> Trunk Lid

Trunk Lid

  1. Disconnect the negative battery cable.
  2. Remove the rear bumper. (See REAR BUMPER REMOVAL/INSTALLATION .)
  3. Detach the request switch from the rear bumper.
  4. Install in the reverse order of removal.
Fig 1: Identifying Request Switch, Connector And Rear Bumper
G04928916Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals