LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Keyless Control Module Configuration

Keyless Control Module Configuration

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Module Programming".
    • When using the PDS (Pocket PC)
      1. Select "Programming".
      2. Select "Module Programming".
      • Fig 1: Identifying DLC-2 Connector
      G05986006Courtesy of MAZDA MOTORS CORP.
  3. Then, select items from the screen menu in the following order.
    1. Select "Programmable Module Installation".
    2. Select "RKE".
  4. Perform the configuration according to the directions on the screen.
  5. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.
scientia non olet · About LEMON Manuals