LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> MX-5 Miata Touring, Standard >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System LF 2.0L) >> DTC P2229 [LF] >> Notes

DTC P2229 [LF]: Notes

DTC P2229 (LF) DETECTION CONDITION AND POSSIBLE CAUSE

DTC P2229 BARO sensor circuit high input
DETECTION CONDITION 
  • The PCM monitors input voltage from the BARO sensor. If input voltage is above 4.0 V  , the PCM determines that the BARO sensor circuit has a malfunction.

Diagnostic support note 
  • This is a continuous monitor (CCM).
  • The MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
  • FREEZE FRAME DATA (Mode 2/Mode 12) is available.
  • The DTC is stored in the PCM memory.
POSSIBLE CAUSE 
  • BARO sensor (built-in PCM) malfunction
  • PCM malfunction
scientia non olet · About LEMON Manuals