DTC P0111 [LF]: Notes
DTC P0111 (LF) DETECTION CONDITION AND POSSIBLE CAUSE
| DTC P0111 |
IAT sensor circuit range/performance problem |
| DETECTION CONDITION |
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if the PCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the PCM.
- PENDING CODE is available if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2/Mode 12) is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- MAF/IAT sensor connector or terminals malfunction
- IAT sensor malfunction
- PCM connector or terminals malfunction
- PCM malfunction
|