With Exterior Open function (With Power Retractable Hardtop)
- Measure the voltage at each terminal.
- If the voltage is not as specified in the Terminal Voltage Table, inspect the parts under "inspection item(s)" and related wiring harnesses.
- If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, replace the power window main switch.
TERMINAL REFERENCE CHART
| Terminal | Signal name | Connected to | Measured condition | Voltage (V) | Inspection item (s) |
|---|---|---|---|---|---|
| 1A | Power supply (B+) | P.WIND2 20 A fuse | Under any condition | B+ |
|
| 1B | IG1 |
|
Switch the ignition to ON | B+ |
|
| Switch the ignition to LOCK | 1.0 or less | ||||
| 1D | Close output | Power window motor (RH) | While door glass is opening | 1.0 or less |
|
| While door glass is closing | B+ | ||||
| 1F | Open output | Power window motor (RH) | While door glass is opening | B+ |
|
| While door glass is closing | 1.0 or less | ||||
| 1G | GND | Body ground | Under any condition | 1.0 or less |
|
| 1H | Communication | Keyless control module | Because this terminal is for communication, good/no good judgment by terminal voltage is not possible. |
|
|
| 1I | Close output | Power window motor (LH) | While door glass is opening | 1.0 or less |
|
| While door glass is closing | B+ | ||||
| 1J | Open output | Power window motor (LH) | While door glass is opening | B+ |
|
| While door glass is closing | 1.0 or less | ||||
| 2B | Communication | Power retractable hardtop control module | Because this terminal is for communication, good/no good judgment by terminal voltage is not possible. |
|
|
| 2C | Communication | Power retractable hardtop control module | Because this terminal is for communication, good/no good judgment by terminal voltage is not possible. |
|
|