LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> CX-7 Touring, 2.3 3, FWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Front Seat Belt Removal/Installation >> Connector Removal Note

Connector Removal Note

  1. Using a flathead screwdriver, pry out the connector stopper plate.
  2. Disconnect the connector.
    Fig 1: Disconnecting Pre-Tensioner Seat Belt Connector
    G04860845Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals