ISO 9141 Communications Network
The ISO 9141 communications network is a single wire network. The ISO 9141 communications network does not permit intermodule communication. When the IDS or equivalent tester communicates to modules on the ISO 9141 communication network, the IDS or equivalent tester must request all information; the modules cannot initiate communications.
The following fault chart describes the specific ISO 9141 network failures and their resulting symptom:
ISO 9141 Network Communication Fault Chart
ISO 9141 NETWORK COMMUNICATION FAULT CHART
| Failure Description | Symptom |
|---|---|
| ISO circuit open | No communication |
| ISO circuit short to voltage | No communication |
| ISO circuit short to ground | No communication |
| Module loss of voltage or ground | No communication |
| Module internal failure | No communication |