LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 6 s Touring >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Outer Mirror Inspection

Power Outer Mirror Inspection

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Disconnect the power outer mirror connector.
  4. Apply battery positive voltage and connect the ground to the power outer mirror terminals and inspect the power outer mirror operation.
    Fig 1: View Of Power Outer Mirror Adjustment Motor Circuit With Terminals
    G06200759Courtesy of MAZDA MOTORS CORP.
    • If the power outer mirror does not operate as indicated in the table, replace it.
      POWER OUTER MIRROR ADJUSTMENT OPERATION

      Mirror operation direction Terminal
      B+ Ground
      Up I D
      Down D I
      Left E D
      Right D E
      Fold A L
      Unfold L A
  5. Apply battery voltage to power outer mirror connector terminal A, and connect terminal C to ground.
    Fig 2: Heater Resistance Reference Chart
    G06200760Courtesy of MAZDA MOTORS CORP.
    Fig 3: View Of Power Outer Mirror Heater Connector With Circuit
    G06200761Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, go to the next step.
  6. Remove the mirror glass. (See OUTER MIRROR GLASS REMOVAL ) (See OUTER MIRROR GLASS INSTALLATION )
  7. Apply battery voltage to outer mirror glass connector terminal A, and connect terminal B to ground
    Fig 4: View Of Power Outer Mirror Element Connector With Circuit
    G06200763Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, or if the resistance is not within the specification, replace the outer mirror glass
      • Fig 5: Outer Mirror Glass Element Resistance Reference Chart
      G06200762Courtesy of MAZDA MOTORS CORP.
    • If as indicated in the table, or if the resistance is within the specification, replace the power outer mirror.
  8. Verify that the continuity is as indicated in the table.
    Fig 6: Heater & Indicator Light Continuity Reference Chart
    G06200764Courtesy of MAZDA MOTORS CORP.
    • If not as indicated, replace the power outer mirror.
      Fig 7: Power Outer Mirror Heater & Indicator Light Circuit With Connector Terminals
      G06200765Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals