LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 6 i SV, 2.5 H >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (L5) >> Before Service Precaution [L5] >> Fuel Line Safety Procedure

Fuel Line Safety Procedure

  1. Disconnect the negative battery cable.
  2. Remove the fuel-filler cap to release the pressure inside the fuel tank.
  3. Remove the fuse (FUEL PUMP 25A).
  4. Connect the negative battery cable. See BATTERY REMOVAL/INSTALLATION [L5] .
  5. Start the engine.
  6. After the engine stalls, crank the engine 3-4 times.
  7. Switch the ignition to off.
  8. Install the fuse (FUEL PUMP 25A).
Fig 1: Identifying Fuse (Fuel Pump 25A)
G06204973Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals