LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 6 i SV, 2.5 H >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L5) >> Knock Sensor (KS) Removal/Installation [L5]

Knock Sensor (KS) Removal/Installation [L5]

  1. Disconnect the negative battery cable.
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [L5] .)
  3. Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L5] .)
  4. Disconnect the KS connector.
  5. Remove the KS.
  6. Install in the reverse order of removal.
    Fig 1: Lnock Sensor & Bolt With Torque Specifications
    G06205261Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals