LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 5 Touring, 2.3 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 585 (Security System And Locks System) >> Sliding Door Outer Handle Removal/Installation

Sliding Door Outer Handle Removal/Installation

WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the sliding door trim. (See SLIDING DOOR TRIM REMOVAL/INSTALLATION .)
  2. Remove the sliding door glass. (See SLIDING DOOR GLASS REMOVAL/INSTALLATION .)
  3. Remove the sliding door lock actuator. (See SLIDING DOOR REMOVAL/INSTALLATION .)
  4. Remove the sliding door module. (See SLIDING DOOR MODULE REMOVAL/INSTALLATION .)
  5. Remove the bolts.
    Fig 1: Sliding Door Outer Handle Remove / Install Replacement Components With Torque Specifications
    G05543465Courtesy of MAZDA MOTORS CORP.
  6. Secure the rear part of the sliding door outer handle and, with the sliding door outer handle lever pulled outward (1), remove the rear part of the sliding door outer handle from the sliding door.
    Fig 2: Identifying Rear Part Of Sliding Door Outer Handle From Sliding Door
    G05543466Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals