Instrument Cluster Customized Function Setting Procedure

WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.

Connect the M-MDS to the DLC-2.
After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (laptop PC)
  1. Select "Module Programming".
- When using the PDS (Pocket PC)
  1. Select "Programming".
  2. Select "Module Programming".
Then, select the following from the screen menu.
1. "Programmable Parameters"
2. "Warning Lamps/Chimes"
  
  Fig 1: Identifying Data Link Connector 2
  Courtesy of MAZDA MOTORS CORP.
Select the following items and change the setting according to the directions on the screen.
Supported items
- Fuel Response Data (level 1-16)