Continuity Inspection
WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [G35M-R] .)
- Verify that the continuity between neutral switch terminals A and B is as indicated in the table.
- If there is no malfunction, perform the "Circuit Open/Short Inspection".
- If there is any malfunction, replace the neutral switch.
MEASURED CONDITION AND CONTINUITY REFERENCE
| Measured condition | Transmission | Continuity |
|---|---|---|
| Rod pushed | In neutral | Continuity detected |
| Except above | Other | No continuity |