LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 5 Touring, 2.3 L >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (L3) >> Starter Removal/Installation [L3] >> Notes

Starter Removal/Installation [L3]: Notes

WARNING:
  • Remove and install all parts when the engine is cold, otherwise they can cause severe burns or serious injury.
  • When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the negative battery cable before performing the following operation.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  2. Disconnect the negative battery cable.
  3. Remove the under cover.
  4. Remove the clutch release cylinder with the pipes still connected. (MTX) (See MANUAL TRANSAXLE REMOVAL/INSTALLATION [G35M-R] .)
  5. Remove in the order indicated in the table.
  6. Install in the reverse order of removal.
    Fig 1: View Of Starter Components With Torque Specifications
    G05544745Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals