LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 5 Touring, 2.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 585 (Security System And Locks System) >> Liftgate Latch And Lock Actuator Removal/Installation

Liftgate Latch And Lock Actuator Removal/Installation

WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  2. Disconnect the negative battery cable.
  3. Remove the liftgate trim. (See LIFTGATE TRIM REMOVAL/INSTALLATION .)
  4. Remove the bolts, then remove the liftgate latch and lock actuator
  5. Install in the reverse order of removal. 6.9-9.8 n.3
    Fig 1: Liftgate Latch And Lock Actuator Remove / Install Replacement Components With Torque Specifications
    G05543494Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals