Interior Light Bulb Removal/Installation

WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.

Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] ).
Disconnect the negative battery cable.
Insert a tape-wrapped flathead screwdriver into the service hole and pry with the screwdriver in the direction shown by the arrow to remove the lens.

Fig 1: Removing Lens
Courtesy of MAZDA MOTORS CORP.
Remove the interior light bulb.
Install in the reverse order of removal.

Fig 2: Identifying Interior Light Bulb
Courtesy of MAZDA MOTORS CORP.