LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 5 Touring, 2.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (Lighting System) >> Auto Light Illumination Level Setting

Auto Light Illumination Level Setting

WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Module Programming".
    • When using the PDS (Pocket PC)
      1. Select "Programming".
      2. Select "Module Programming".
  3. Then, select items from the screen menu in the following order.
    1. Select "Programmable Module Installation".
    2. Select "Exterior Lighting".
  4. Select the item name, and then select option.
    • Autolamp On Setting (Standard (other) / Low (other))
      Fig 1: Identifying DLC-2 Connector
      G05545260Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • When the M-MDS is set to Low, the auto-light sensor sensitivity decreases, and the TNS and headlight illumination timing is slower.
scientia non olet · About LEMON Manuals