LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 5 Touring, 2.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 572 (Basic System (HVAC)) >> A/C Unit Removal/Installation >> A/C Unit Installation Note

A/C Unit Installation Note

WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. When replacing the A/C unit or evaporator, add compressor oil to the refrigerant cycle.

    Supplemental oil amount (approx. quantity) 25 ml {25 cc, 0.8 fl oz} 

  2. Tighten the A/C unit adjusting bolt until it lightly touches the A/C unit.
    Fig 1: Identifying Tightening Direction Of A/C Unit Adjusting Bolt
    G05545297Courtesy of MAZDA MOTORS CORP.