LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 5 Sport, 2.3 L, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L3) >> Barometric Pressure (BARO) Sensor Inspection [L3]

Barometric Pressure (BARO) Sensor Inspection [L3]

NOTE:
  • Perform the following inspection only when directed.
  • The following vacuum values are indicated by relative pressure from the PCM. (See PCM REMOVAL/INSTALLATION [L3] .)
  1. Connect the M-MDS to the DLC-2.
  2. Turn the ignition switch to the ON position.
  3. Select BARO on the M-MDS.
  4. Verify that the BARO PID (pressure) and barometric pressure are practically equal.
scientia non olet · About LEMON Manuals