LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 5 Sport, 2.3 L, Standard >> Repair and Diagnosis >> Body & Frame >> Glass/Windows/Mirrors >> Power Window Main Switch Removal/Installation

Power Window Main Switch Removal/Installation

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  2. Disconnect the negative battery cable.
  3. Remove the cover, then remove the screw.
  4. Detach clips B using a tape-wrapped flathead screwdriver.
  5. Detach tab A by pulling it in the direction of the arrow, and remove the switch panel from the front door trim.
  6. Disconnect the power window main switch connector and the power outer mirror switch connector.
    Fig 1: Identifying Power Window Main Switch Components
    G05545672Courtesy of MAZDA MOTORS CORP.
  7. Remove the screws, then remove the power window main switch.
  8. Install in the reverse order of removal.
    Fig 2: View Of Power Window Main Switch
    G05545673Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals