LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 3 i Touring, 2.0 F, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Automatic Transaxle [Shift Mechanism]) >> Selector Lever Component Removal/Installation >> Notes

Selector Lever Component Removal/Installation: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L3] .)
  2. Disconnect the negative battery cable.
  3. Remove the battery, battery box and battery tray. (See BATTERY REMOVAL/INSTALLATION [LF, L3] .)
  4. Remove the air cleaner component. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION [LF, L3] .)
  5. Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
  6. Remove the heat insulator (front and center).
  7. Remove in the order indicated in the table.
  8. Install in the reverse order of removal.
    Fig 1: Selector Lever Replacement Components With Torque Specifications
    G04956151Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals