LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 3 Mazdaspeed, 2.3 M >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Map Light Removal/Installation

Map Light Removal/Installation

  1. Disconnect the negative battery cable.
  2. Insert a tape-wrapped flathead screwdriver into the gap between the headliner and the map light.
  3. Press the tab and remove the map light.
    Fig 1: View Of Map Light
    G04957042Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the map light connector.
  5. Remove the socket, then remove the map light bulb.
  6. Install in the reverse order of removal.
    Fig 2: Exploded View Of Map Light Assembly
    G04957043Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals